New Bar’s Leaks Carbon Fiber Block Seal Head Gasket & Cooling Sealant (p/n HG1) is the strongest antifreeze-compatible cooling system repair available. It fixes even hard-to-stop cooling system leaks, including blown head gaskets, and protects the system against future leaks.
Blown head gaskets.
Intake gasket leaks.
Cooling system leaks.
Cracked cylinder heads and engine blocks.
Heater core and radiator leaks.
Leaking freeze and core plugs.
The Solution: Bar’s Leaks Carbon Fiber Block Seal Head Gasket & Cooling Sealant
Repairs blown head gaskets.
Seals intake gasket leaks.
Permanently seals any coolant leaks in plastic, cast iron, copper and aluminum radiators, heater cores, freeze plugs, gaskets and intake manifolds.
Repairs cracked cylinder heads and engine blocks.
Protects against future leaks.
Reduces coolant temperature and prevents overheating.
Easy to use! One step process no radiator flush necessary.
Bill Best of Bill Best Auto Repair in Ithaca, N.Y., installed Bar’s Leaks Head Gasket & Cooling Sealant in a customer’s 1999 Chevrolet Malibu. The vehicle had 56,000 miles on the odometer, and an intake leak.
“I was not sure it would do the job, but holy cow, this really does work!” he reported. “It’s now been 3,000 miles with no more leaks at all, and it didn’t plug anything. I’ve been in this business since 1951, and have never seen anything like this product. I would recommend it to be used on any car.”
Bar’s Leaks Head Gasket & Cooling Sealant’s exclusive formula combines an antifreeze-compatible liquid glass (sodium silicate) with aramid and refractory fibers: the same super-strong, heat-resistant materials used in bulletproof vests and fireproof clothing. The formula is further reinforced with carbon fiber to bridge larger leaks and create a truly permanent seal that is stronger than the original head gasket itself.
Bar’s Leaks Head Gasket & Cooling Sealant also features the proprietary wetting agent Xtreme Cool. Xtreme Cool reduces the surface tension of coolant which increases its wetting ability as well as improves heat transfer and reduces coolant temperature. As a result, Xtreme Cool helps prevent future leaks and overheating.
There is no need to flush the cooling system before installing Bar’s Leaks Head Gasket & Cooling Sealant. It is added directly to the (cold) radiator. The vehicle is ready to drive less than an hour after installation. Bar’s Leaks Head Gasket & Cooling Sealant is compatible with all types of antifreeze, including conventional green or blue (silicate-based) and extended life red/orange or yellow (OAT/HOAT). For racing applications, it works great in straight water.
The MSRP for Bar’s Leaks Head Gasket & Cooling Sealant is $59.95 per liter bottle. This is considerably less than the $2,500 or so it can cost to professionally repair a blown head gasket. It is available to distribution in case packs of four. Like all Bar’s Leaks products, Bar’s Leaks Head Gasket & Cooling Sealant is made in the U.S.A. The label includes directions in both English and Spanish.
For more information about Bar’s Products, call (800) 345-6572, e-mail firstname.lastname@example.org
or visit the website at www.barsproducts.com
. The website offers a wealth of information, including product descriptions, tech sheets, material safety data sheets (MSDS), FAQs, company history and customer testimonials. You should also follow Bar’s Products on Twitter at http://twitter.com/barsproducts
, on Facebook at www.facebook.com/barsproducts
, on YouTube at http://www.youtube.com/barsproducts
and through its blog at http://barsproducts.tumblr.com/