Automotive Belts, While Lasting Longer Than Ever, Still Wear Out Over Time

Automotive Belts, While Lasting Longer Than Ever, Still Wear Out Over Time

Belts continue to be one of the most replaced wear items on vehicles today. Serpentine belts last a lot longer than older V-belts ever did, but they still wear out over time. The typical replacement interval for serpentine belts and flat belts today is around 90,000 miles – which for many vehicles means only once every seven to nine years!

Sponsored by Dayco

Belts continue to be one of the most replaced wear items on vehicles today. Serpentine belts last a lot longer than older V-belts ever did, but they still wear out over time. The typical replacement interval for serpentine belts and flat belts today is around 90,000 miles – which for many vehicles means only once every seven to nine years! That’s a lot of miles between belt changes.

Today’s hoses are even longer-lived thanks to much improved synthetic rubbers such as EPDM. Even so, older high-mileage hoses should be closely examined and replaced when the cooling system is serviced. Recommend new hoses (and clamps) if a customer is changing a water pump, radiator or heater core.

Serpentine belts can be tricky to replace because of the way in which they are routed and because of limited access in a tight engine compartment. Although most late-model belt drive systems use a single belt, some applications also may have a separate belt for an accessory such as the A/C compressor or power steering pump. What’s more, some applications may use a secondary “stretch fit” belt that has no traditional adjustment. Installing one of these requires a special tool to slip the belt over the pulleys without damaging the belt.

Many belt drive systems also incorporate decoupling pulleys to dampen noise and vibration. Even so, belt noise is still a common complaint and reason for replacement. When the V-ribs on the underside of a serpentine belt become worn, the belt may slip and make noise. It’s hard to see this type of wear, so a belt wear gauge tool should be used to measure the depth of the grooves in the belt. If the belt is worn, it’s time for a new belt.

Belt noise also can be caused by misalignment between pulleys. These include a misaligned power steering pump pulley, idler pulley(s), automatic belt tensioner pulley, water pump pulley (which may be due to wear in the pump shaft bearings), and even a worn or loose harmonic balancer. This type of misalignment can be difficult to see, so pulley alignment should be carefully checked with a straight edge or a laser alignment tool.

By the time a worn belt needs to be replaced, chances are other components in the belt drive system also may need attention. No. 1 among these is the automatic belt tensioner. Over time, the spring that maintains belt tension can weaken. Rust, corrosion and wear also can cause binding that prevents the tensioner from rotating normally to maintain proper belt tension. Belt flutter or belt noise when revving the engine are indications of a weak tensioner.

Bearing wear in idler pulleys also can create noise and misalignment. The bearings are sealed and cannot be relubricated, so if an idler pulley is noisy or wobbling it needs to be replaced.

Changing a serpentine belt usually requires a long handle breaker bar or special tool to rotate the belt tensioner so the belt can be slipped off the pulleys. If there is no belt routing decal under the hood (which many cars lack), your customer should snap a photo of the belt before it is removed with a phone camera, or make a simple drawing of how it is routed. It’s easy to misroute a serpentine belt if you can’t remember how it was positioned before it was removed. A sure sign of misrouting is if the belt seems to be too long or too short for the application, or if it won’t slip over the last pulley, or it is loose after it has been installed.

Installation problems can be avoided by comparing the length of the old and new belts to make sure they are exactly the same length and width.

Finally, recommend a top quality name brand replacement belt. No-name cheap quality belts won’t last like a quality belt.

This article was sponsored by Dayco. For more information, please visit our website at www.dayco.com

You May Also Like

Extended Engine Oil Change Intervals / A false economy?

While most everyone is aware that the cost of used and new vehicles has gone up over the past few years, it is not the only expense related to owning a vehicle that has significantly increased over that time. The latest 2023 AAA data found that the average cost of new vehicle ownership has soared

While most everyone is aware that the cost of used and new vehicles has gone up over the past few years, it is not the only expense related to owning a vehicle that has significantly increased over that time. The latest 2023 AAA data found that the average cost of new vehicle ownership has soared to $12,182 a year. This is a 13% increase from 2022. With the cost of preventative maintenance also rising, OEMs have chosen to reduce these costs by extending lubricant drain intervals for engines and transmissions, citing “improved” or “synthetic” oils as the reason. What is most concerning is the OEM extension of critical preventative maintenance requirements for the new high output “fuel efficient” turbocharged gasoline direct injection (TGDI) engines.

Engineering For Excellence – MEYLE HD Solves Tesla Noisy Control Arm Issues

By Stefan Bachmann, Head of Steering & Suspension, MEYLE HD The effort that goes into creating one of the world’s most technologically advanced electric vehicles is staggering, and the engineers at Tesla who developed the Model 3 and the Model Y should be proud. However, they also should tip their caps to the engineering team

A Closer Look: Servicing Electric and Hybrid Vehicles

Hybrid vehicles have been sold in the U.S. for over 20 years. As hybrids continue to grow in popularity, and as full electric vehicles have entered the market in the past several years, they have brought with them numerous service opportunities for aftermarket repair facilities. Whether shops dive in and get involved with replacing batteries,

Advanced Filtration Is Key to Vehicle Longevity

Let’s face it, we love our cars – and we drive a lot. According to statistics from the U.S. Department of Transportation, Americans drive more than 13,000 miles per year on average. Although the miles continue to rack up on our cars and trucks, their overall shelf life keeps increasing. Once upon a time, vehicles

What Causes Fuel Pumps to Fail?

Like most vehicle components, natural wear and tear is the unavoidable cause for parts replacement. Fuel pumps are often out of sight and out of mind for most shop visitors. That’s because they are an as-needed repair and not typically a part of ongoing maintenance. Nevertheless, if you diagnose fuel pump failure, customers will want

Other Posts

Protecting Your Vehicle in the Winter

Depending on where you live, autumn is an idyllic time of year with bright colors and mild temperatures. If there is one downside though, it means that winter is on its way, which means frigid temperatures, snow, ice and difficult road conditions. The lifespans of cars and trucks are increasing all the time, so protecting

A Closer Look: Standard® Gasoline Direct Injection (GDI)

Gasoline direct injection (GDI) is used on most new vehicles and requires a different approach to diagnosis and service. GDI technology has been an integral part of helping to improve fuel economy while reducing emissions, and can be found on more than half of the U.S. fleet. In fact, the use of GDI engines has

Overcoming Supply Chain Issues in Today’s World

Many legislative and environmental mandates have affected the collision repair industry over the last decade. To comply with such mandates, vehicle manufacturers continue to design vehicles with increasingly advanced electronics, ranging from Advanced Driver Assistance Systems that increase safety, helping people with everything from parking to driving, to the recent push for electric vehicles. They’ve

High Oil Consumption?

A common question an OEM oil supplier like ENEOS sees is how to tell when oil consumption becomes excessive? Since a few factors could be involved, here are some of the potential implications. How much is too much?First, because of wear, vehicles are more likely to consume engine oil as they age. Common culprits that