Have a 2000 S10 new brake pads front, new shoes and drums rear also new master cylinder.

Have a 2000 S10 new brake pads front, new shoes and drums rear also new master cylinder.

Have a 2000 S10 new brake pads front, new shoes and drums rear also new master cylinder. System has been bled twice and still pedal goes slowly to the floor. This was happening prior to the brake job also. I have pedal when the engine is off however once it cranks and you hit the brakes the pedal goes to the floor.

There are several things that could cause this issue. You for sure need to check for leaks, the master cylinder could be bad, and the booster could be bad. Could be as simple as a vacuum leak.

Matthew Vaughn
O’Reilly Auto Parts

You May Also Like

The Hidden Expense of Inexpensive Brake Pads

With premium products, it’s often the “extras” that people don’t consider when comparing them to lesser brands.

Like many product lines in our inventories, brake pads are often dual or even triple lined. To service a wide variety of vehicles and customer types in a dynamic market, it has become a necessity to offer various price points on one of the most critical safety items we offer. 

AAPEX Web Training Series Set to Begin This Month

Online educational series to run from May to October, costing attendees nothing.

Do You Suffer From CED? Good News – It’s Curable

The creep of Customer Experience Decline can take hold if you allow your shop to lose focus.

Tool Time Podcast: CTA Tools

Nadine Battah and Eric Garbe learn about CTA Tools’ history and innovative technology.

The Purge: Flushing & Filling the Coolant

This job isn’t needed as often as it used to be, but it’s still important.

Other Posts

WAI Releases 116 New Part Numbers

The new part numbers include starters, alternators, wiper motors, sensors, and transfer case motors.

WAI Releases 116 New Part Numbers
Standard Motor Products’ VVT Program Expands

SMP said the program offers more than 600 part numbers for import and domestic vehicles, with new numbers added each month.

Standard Motor Products’ VVT Program Expands
Cummins, Daimler Truck and PACCAR Form Joint Venture

The completed joint venture is now known as Amplify Cell Technologies.

MEMA Aftermarket Suppliers’ BMC to Host Summer Meeting

The Brake Manufacturers Council meeting will be held on May 31, in Naples, Florida.