Observe National Car Care Month With A Driveway Vehicle Check

Observe National Car Care Month With A Driveway Vehicle Check

National Car Care Month is the perfect time for your customers to make sure their vehicles are operating safely.

National Car Care Month in April is the perfect time for your customers to perform simple driveway car care to make sure their vehicles are operating safely and dependably for essential trips during this trying time, according to the Car Care Council.

“A driveway vehicle check only takes about 10 minutes. These simple steps will help keep you on the road so you can run important errands and arrive safely to your destinations,” said Rich White, executive director of the Car Care Council. “If you find your vehicle needs service, automotive repair is considered essential, so call your trusted local repair shop. Many shops have remained open in stay-at-home areas and most have instituted polices to ensure limited personal contact, allowing you to drop off and pick up your vehicle quickly and safely.”

The nonprofit Car Care Council suggests inspecting the following items as part of a simple driveway vehicle inspection:

  • Check all fluids, including engine oil, power-steering and brake and transmission fluid as well as windshield-washer solvent and antifreeze/coolant.
  • Check the hoses and belts that can become cracked, brittle, frayed or loose or show signs of excessive wear. These are critical to the proper functioning of the electrical system, air conditioning, power steering and the cooling system. 
  • Check the tires, including tire pressure and tread. Uneven wear indicates a need for wheel alignment. Tires also should be checked for bulges and bald spots.
  • Check the wipers and lighting so that you can see and be seen. Check that all interior and exterior lighting is working properly and inspect and replace worn wiper blades so you can see clearly when driving during precipitation. Keep the reservoir filled with solvent.

The Car Care Council’s 80-page Car Care Guide can be ordered free-of-charge by visiting www.carcare.org/car-care-guide. Available in English and Spanish, the popular guide features helpful information about maintaining your vehicle for safety, dependability and value.

You May Also Like

Wheel Bearings and Geometry

The pre-load determines the exact location at which the roller balls will contact the inner and outer races.

Wheel-bearing pre-load and geometry are terms that don’t get used too often in practice. But in reality, every time we remove or install a wheel bearing, we affect both – whether we consciously think about it or not.

Many of us clocked countless hours cleaning and repacking tapered roller bearings, long before the Generation 1 press-in sealed wheel bearings first became popular in the late 1970s on front-wheel-drive cars. Even when we began to see sealed wheel bearings on the front, tapered roller bearings usually still were used in the rear, in the hub of a brake drum or rotor.

Mapping Out the Future of the Global Aftermarket

Distribution leaders discuss the value of being part of NEXUS Automotive International.

Seasonal Sales Opportunities

With each new season, we’re presented with different challenges and different sales opportunities.

Brake Rotors: Resurface Or Replace?

With any rotor problems, unless it makes economic sense to resurface, just replace them.

Making The Case For ADAS

As real-world testing of autonomous vehicles begins, the technology is encountering some pretty significant speed bumps.

Other Posts

Loaded Struts: What’s In A Name?

Loaded strut assemblies are known by many monikers, but they all offer a common advantage: ease of installation.

Selling Wiper Blades

Don’t wait until winter arrives to talk about the importance of replacing them.

Diagnosing Engine Misfires

Contrary to popular belief, the ignition system isn’t always the cause of an engine misfire.

Active Motor Mounts

Active motor mounts were developed to absorb NVH and support the added workload of modern engines.