VIDEO: Replacing The Weakest Link

VIDEO: Replacing The Weakest Link

All the coolant hoses should be replaced at the same time.

Most original equipment coolant hoses made of EPDM should easily last up to 10 years or more in normal service. So why should customers expect anything less from an aftermarket replacement hose?

The 60,000/90,000-rule is always a good idea. Start the belt and hose inspection process as early as 60,000 miles. A good opportunity to do this is at every oil change as oil changes are much more frequent than coolant changes. And then plan on hose replacement at 90,000 miles or at least give it consideration.

This video is sponsored by Continental.

You May Also Like

Sway Bars and Linkages

The basic operation of a sway bar is quite simple.

Sway Bars and Linkages

Sway bars, anti-sway bars, roll bars, anti-roll bars and stabilizer bars are all the same thing, and it’s generally understood they improve handling, but how?

Any time a vehicle is turning, forces related to the laws of physics cause the body to roll, sway or tip away from the turn. When this happens, the weight shift to the outside, in turn compresses the suspension on the outside, resulting in lift and a loss of traction on the inside, which leads to poor handling and potentially the loss of control.

Gear Ratios and Vehicle Performance

Just remember, there is no perfect gear ratio.

Gear Ratios and Vehicle Performance
Electronic Stability and Traction Control

Their components work together seamlessly to help keep the vehicle under control.

Electronic Stability and Traction Control
Tesla Model 3 TPMS Service

Resetting and programming TPMS sensors for a Tesla is a lot like any other vehicle, and the challenge is still the same: keeping the light off.

Tesla TPMS Service
LED Work Lights for Automotive Repair and Maintenance

LED lighting has been a game-changer for illumination in the workplace and at home.

LED Work Lights

Other Posts

Dayco Adds 29 New Part Numbers to Portfolio

The 29 new part numbers will be available by the end of March for distributors interested in adding to their product coverage.

Dayco new parts
Bleeding the Brakes (Part 2)

With the proper preparation and a little bit of patience, brake bleeding can be a routine job for your customers, whether they’re professionals or DIYers.

Bleeding the Brakes Part 2
Bleeding the Brakes (Part 1)

It’s a simple concept, but it’s not without the occasional headache.

Bleeding the Brakes Part 1
Performance Upgrades for Drivetrains

Whether you’re increasing power or making suspension modifications, drivetrain upgrades will be next in line.

Performance Upgrades for Drivetrains