Bleeding the Brakes (Part 2)

Bleeding the Brakes (Part 2)

With the proper preparation and a little bit of patience, brake bleeding can be a routine job for your customers, whether they’re professionals or DIYers.

In the first video of this two-part series, we talked about the importance of bleeding air from a vehicle’s brake system on a regular basis, and discussed some of the basic procedures involved in this process.

Delving a bit deeper into the subject, we discuss the master cylinder and a few techniques we didn’t cover in the first video.

With the proper preparation and a little bit of patience, brake bleeding can be a routine job for your customers, whether they’re professionals or DIYers.

This video is sponsored by The Pronto Network. 

You May Also Like

Gear Ratios and Vehicle Performance

Just remember, there is no perfect gear ratio.

Gear Ratios and Vehicle Performance

Have you ever wondered in a rear-wheel-drive vehicle how the engine spinning in the center of the car can spin the wheels that are perpendicular to the engine?

Well it is a mystery how that happens. Additionally in that same space we change the ratios of revolutions and the torque available to spin everything.

Electronic Stability and Traction Control

Their components work together seamlessly to help keep the vehicle under control.

Electronic Stability and Traction Control
Tesla Model 3 TPMS Service

Resetting and programming TPMS sensors for a Tesla is a lot like any other vehicle, and the challenge is still the same: keeping the light off.

Tesla TPMS Service
LED Work Lights for Automotive Repair and Maintenance

LED lighting has been a game-changer for illumination in the workplace and at home.

LED Work Lights
Bleeding the Brakes (Part 1)

It’s a simple concept, but it’s not without the occasional headache.

Bleeding the Brakes Part 1

Other Posts

Selling the Complete Brake Job

These simple guidelines will help you ensure that your customers have everything they need.

Brake Job
Performance Upgrades for Drivetrains

Whether you’re increasing power or making suspension modifications, drivetrain upgrades will be next in line.

Performance Upgrades for Drivetrains
Why Aren’t All Timing-Chain Guides Made of Metal?

To call some timing-chain guides plastic is not accurate.  

Timing Chain Guides
A Closer Look at Torque Converters

As the automatic transmission itself evolved, the standard fluid coupling was replaced by the torque convertor.

Torque Converters