Road to AAPEX, Ep. 5: Automotive’s Past and Future

Road to AAPEX, Ep. 5: Automotive’s Past and Future

See how Babcox Media's Joe Keene prepares the Lincoln Blackwood for the road (with assistance from Transtar).

To know where you’re going, you have to know where you’ve been.

For Babcox Media’s Joe Keene, an ASE-certified technician charged with fixing up a rare Lincoln Blackwood, it means heading back to Transtar Autobody Technologies in Detroit to put the finishing touches on the Blackwood.

Then, he’ll put Babcox Media HQ in the rearview mirror as he heads out on the Lincoln Highway on his way to AAPEX. One of his first stops is the Studebaker Museum in South Bend, Indiana, where he hopes to bridge the connection between the automotive industry’s past and its future.

“What most people don’t know about Packard is that between 1902 and 1912, they produced 1,841 electric Packard cars,” Keene explained as he observed the classic cars. “From 1900 to 1912, a third of all U.S. cars were electric. So, seeing this resurgence of electric cars today is pretty interesting.”

In 1919, Henry Ford introduced an electric starter, generator and lighting to the Model T. This made the vehicle much easier to start compared to hand cranking, and it was more affordable than the electric car. The rest is history.

Fast forward to today. While Keene continues down the historic highway in the refurbished Lincoln, Babcox Media Editor David Sickels sets off to visit Proterra, a company leading the charge in today’s battery-driven EVs.

“I think we are at the tip of the iceberg in terms of EV adoption,” said Chris Bailey, chief business officer at Proterra. “I believe the single greatest force we’ll encounter over the next five to 10 years is the rate at which we expect the market to adopt this technology. Along the way, we’ll undoubtedly see several new innovations and technologies emerging to address the varied commercial market segments.”

Watch the video above to see how Keene prepares the Lincoln Blackwood for the road (with assistance from Transtar), and get a glimpse into the automotive future as Sickels explores Proterra.

You May Also Like

Gear Ratios and Vehicle Performance

Just remember, there is no perfect gear ratio.

Gear Ratios and Vehicle Performance

Have you ever wondered in a rear-wheel-drive vehicle how the engine spinning in the center of the car can spin the wheels that are perpendicular to the engine?

Well it is a mystery how that happens. Additionally in that same space we change the ratios of revolutions and the torque available to spin everything.

Electronic Stability and Traction Control

Their components work together seamlessly to help keep the vehicle under control.

Electronic Stability and Traction Control
Tesla Model 3 TPMS Service

Resetting and programming TPMS sensors for a Tesla is a lot like any other vehicle, and the challenge is still the same: keeping the light off.

Tesla TPMS Service
LED Work Lights for Automotive Repair and Maintenance

LED lighting has been a game-changer for illumination in the workplace and at home.

LED Work Lights
Bleeding the Brakes (Part 2)

With the proper preparation and a little bit of patience, brake bleeding can be a routine job for your customers, whether they’re professionals or DIYers.

Bleeding the Brakes Part 2

Other Posts

Bleeding the Brakes (Part 1)

It’s a simple concept, but it’s not without the occasional headache.

Bleeding the Brakes Part 1
Performance Upgrades for Drivetrains

Whether you’re increasing power or making suspension modifications, drivetrain upgrades will be next in line.

Performance Upgrades for Drivetrains
Why Aren’t All Timing-Chain Guides Made of Metal?

To call some timing-chain guides plastic is not accurate.  

Timing Chain Guides
A Closer Look at Torque Converters

As the automatic transmission itself evolved, the standard fluid coupling was replaced by the torque convertor.

Torque Converters