Tech Tip: Mitsubishi 2-3 Shift Flare, Slipping

Tech Tip: Mitsubishi 2-3 Shift Flare, Slipping

Some customers may complain of shift flare when shifting from second gear to third gear. This bulletin contains procedures for diagnosing and repairing this condition. New, improved parts are listed in the Parts Information section of this bulletin.
Affected vehicles: 1997-2002 Mirage, 1999-2005 Galant, 2000-’05 Eclipse, 2001-’04 Diamante, 2001-’05 Eclipse Spyder, 2002-’05 Lancer, 2003-’05 Outlander, 2004 Lancer Sportback Wagon and 2004-’05 Endeavor
Procedure:
1. Test-drive the vehicle to confirm that shift flare occurs at the 2-3 shift.

2. Check the ATF level and color. Correct as necessary. Inspect the A/T drain plug for metal debris.

3. Start the engine and warm the ATF to 140-212° F (60-100° C). With constant throttle opening at TPS reading 1.7-1.8V, confirm that the 2-3 upshift occurs between 35 and 40 mph (between 56 and 64 km/h). Continue this driving pattern until the 2-3 shift has occurred five times.

a. If the shift flare is not eliminated after the 2-3 shift has occurred five times, continue with Step 4.

4. Check for DTCs.

a. If any DTC is set, diagnose the DTC as described in the appropriate service manual.
b. If no DTCs are set, perform the pressure tests for the OD clutch and second brake as described in Group 23 of the appropriate service manual. Record the pressures on the repair order. Then continue with Step 5.

  1. Open the rear cover. In the seal ring area, inspect the drum, seal rings and rear cover for grooves, excessive damage and poor clearance. See Fig. 1.

Fig. 1

Note: Perform this inspection/repair with the transmission assembly in the ­vehicle.

  1. If any grooves, damage or clearance problems are found, replace the following parts with the new, improved parts listed in the Parts Information chart at right.

– Reverse/OD Clutch Assembly (with drum)
– Reverse Retainer
– Seal Rings
– Rear Cover
– Input Shaft Rear Bearing

  1. If no grooves, damage or clearance problems are found, follow the diagnosis procedure in Group 23 of the appropriate service manual.

PARTS INFORMATION

Part                                             Model                   Part Number

Reverse/OD Clutch Assembly    Mirage 1.5L             2722A020
Mirage 1.8L              2722A019
Rear Cover                                  Mirage 1.5L, 1.8L    MD763204

Reverse/OD Clutch Assembly    Diamante                  2722A017
Rear Cover                                 Diamante                  MD763194

Reverse/OD Clutch Assembly    1999-2003 Galant 2.4L    2722A019
1999-2003 Galant 3.0L    2722A017
Rear Cover                                 1999-2003 Galant 2.4L    MD763204
1999-2003 Galant 3.0L    MD763194

Reverse/OD Clutch Assembly    2004-’05 Galant 2.4L    2722A019
2004-’05 Galant 3.8L    2722A023
Rear Cover                                  2004-’05 Galant 2.4L    MD763204
2004-’05 Galant 3.8L    MD763194

Reverse/OD Clutch Assembly    Eclipse/Eclipse Spyder 2.4L    2722A019
Eclipse/Eclipse Spyder 3.0L    2722A017
Rear Cover                                  Eclipse/Eclipse Spyder 2.4L    MD763204
Eclipse/Eclipse Spyder 3.0L    MD763194

Reverse/OD Clutch Assembly    Lancer/Sportback/Outlander    2722A019
Rear Cover                                 Lancer/Sportback/Outlander     MD763204

Reverse/OD Clutch Assembly    Endeavor 3.8L    2722A017
Rear Cover                                 Endeavor 3.8L    MD763194

Seal Rings                           All vehicles listed above    MD760146, MD760147
Input Shaft Rear Bearing    All vehicles listed above    MD752039 or MR446687

Courtesy of Mitchell 1.

You May Also Like

ASE Education Foundation Seeking Outstanding Instructor

Nominations are being accepted for the 2024 Byrl Shoemaker/ASE Education Foundation Instructor of the Year award.

Applications are now being accepted for the 2024 Byrl Shoemaker/ASE Education Foundation Instructor of the Year. The award recognizes a high school or college instructor from an ASE accredited automotive, diesel/truck or collision repair program who demonstrates excellence through their personal dedication and commitment to the young men and women who have chosen to pursue a technical career in the automotive service industry.

Why Does Engine Coolant Need Replacement?

Two specifications can be used to justify replacement — the condition of the additive package & the freezing point.

Gaskets vs. Seals

Whether your customer asks for a gasket or a seal, you know one thing: They’re trying to stop a leak.

Gaskets and Seals
Check the Part: Return Guide for CV-Joint Kit

Dorman offers these three tips to help to determine if it’s a valid warranty claim.

CV Joint Kit
Selling the Complete Brake Job

These simple guidelines will help you ensure that your customers have everything they need.

Brake Job

Other Posts

Customer Service: How It’s Done

Customer service should be your number one priority, and it all starts with the greeting.

Tool Intel: Why Are There So Many Screwdrivers?

Screwdrivers come in many shapes and sizes, and they are not created equal.

Getting to Know Driveshaft Couplers

This often-overlooked undercar part
ensures a smooth transfer of rotational motion.

Driveshaft Couplers
Solenoids: Energizing Motion

Automotive solenoids translate electrical impulses into mechanical movement.

Solenoids