Ultimate Frame Coater Kit Provides Inside-Out Rust Protection

Ultimate Frame Coater Kit Provides Inside-Out Rust Protection

The easy-to-use DIY kit can prepare and coat up to 50 square feet of metal.

The KBS Coatings Ultimate Frame Coater Kit provides everything needed for ultimate inside-out rust protection for auto frames, auto bodies and more.

The easy-to-use DIY kit employs the KBS 3-Step System combined with KBS Cavity Coater to prepare and coat up to 50 square feet of metal, according to the company.

KBS Klean, a nontoxic and biodegradable super cleaner, removes dirt, grease, grime and other contaminants. Next, water based and biodegradable RustBlast effectively dissolves rust and corrosion while etching metal for best adhesion of KBS RustSeal. RustBlast also leaves a zinc phosphate coating to stop flash rust from forming.

The third step is RustSeal, a rust-inhibitive and preventative paint that’s applied by brush, roller or spray gun. RustSeal chemically bonds to metal, including rusted metal, to isolate it from moisture and oxygen. Without those present, metal can’t rust.

RustSeal comes in 11 colors and flows out to provide a beautiful, smooth finish that resembles a powder coat. RustSeal provides a flexible, yet rock-hard barrier that’s extremely resistant to abrasion and impact – so it won’t crack chip, or peel, according to the company.

For ultimate protection, KBS Cavity Coater Aerosol provides rust protection in hard-to-reach areas such as inside frame rails, rocker panels, doors, tailgates and more. Cavity Coater, a self-healing corrosion-inhibiting coating (CIC), provides long-term protection and wicks into welds and seams that primers and top coats can’t reach.

For especially hard to-reach-areas, the KBS Cavity Wand is provided to extend the reach of aerosol Cavity Coater with a reusable 48-inch hose featuring a 360-degree spray tip.

For more information, visit the KBS website or call 888-531-4527.

You May Also Like

U-POL Raptor Product System, Pt. 3: Texture Replacement

A wide range of atomization is needed to produce very fine textures for two-coat texture replacement.

Mark Thomas, North American training manager with U-POL, and Kevin Lewis, regional sales manager with U-POL, demonstrate two-coat texture replacement with U-POL’s Raptor Product System using both a 3M Performance H/O gun and U-POL’s 4880 Professional Vari-Nozzle gun.

View Part 1 Here

View Part 2 Here

U-POL Raptor Product System, Pt. 2: Application Methods

Learn more about the different methods for applying the Raptor Product System.

PRT Launches 59 New Complete Strut Assemblies

Extending PRT’s product portfolio in North America, the new release represents nearly 12M vehicles in new coverage.

Westar Releases New Mounts, Suspension Components

New parts available to service more than 35,000,000 vehicles on U.S. and Canadian roads.

Mevotech Expands Coverage with 188 New Part Numbers

The release covers domestic and import passenger vehicles up to the 2023 vehicle model year.

Other Posts
Hella Blade 6˝ Series Illuminates Off-Road Adventures

The HELLA BLADE Series combines powerful illumination with innovative features for the ultimate off-road driving experience.

High Performance Expo to Debut in Charlotte

The inaugural High Performance Expo (HPX) will be held from June 3-5, 2025, at the Charlotte Convention Center.

Schaeffler Recognized as General Motors 2023 Top Global Supplier

Schaeffler was presented the award during the recent GM Supplier of the Year event in Miami.

B’laster Holdings Launches B’laster Refrigerants Line

The product lineup was created to service and maintain both R-134a and R-1234yf automotive A/C systems.