Lighting The Way: LEDs Are Replacing Conventional Bulbs

Lighting The Way: LEDs Are Replacing Conventional Bulbs

The problem with conventional incandescent bulbs and halogen headlights is that they use too much current for the light they produce and they give off a lot of waste heat.

The latest trend in automotive lighting is LED (Light Emitting Diode) lights. LED lights use an entirely different technology to produce visible light. Conventional incandescent bulbs and headlamps contain a tungsten filament inside a sealed glass bulb. Current flowing through the filament heats it up to around 4,000 degrees F causing it to glow brightly and give off light. This generates a lot of waste heat and is not very efficient at producing light. To prevent the filament from burning up, the air inside the bulb is evacuated and replaced with an inert gas such as argon. With halogen bulbs, the gas also contain traces of iodine or bromine.  This allows the filament to burn brighter and produce more light and whiter light. Traces of xenon may also be added to the gas, or the bulb may be tinted with a special coating to give the light a more bluish cast like that of HID (High Intensity Discharge) headlights.

The problem with conventional incandescent bulbs and halogen headlights is that they use too much current for the light they produce and they give off a lot of waste heat. The bulbs also have a limited lifespan (around 1,000 hours or so), and the filament can break from vibration or being jolted.

HID headlights are about 2X as efficient as halogen headlights so they use much less current. But they do require a very high initial starting voltage (up to 25,000 volts!), which requires adding a special ballast and control electronics to the headlight circuitry. HID headlights do not contain a filament and use an electrical arc passing through a gas inside a high-temperature bulb to generate light.  Because there is no filament to break or burn out, HID headlamps typically last 2X to 5X longer than ordinary headlamps. The downside is HID bulbs are expensive to replace.

LED lights are solid state diodes. They have no bulb or filament and contain no gasses. When current flows through the diode, it excites the material and generates light. LEDs are 4X more efficient than standard bulbs at converting current to light, and they produce much less heat than incandescent bulbs or HID headlamps. LEDs are also extremely long-lived (10,000 plus hours). But until recently, their light output has not been great enough for use in headlights.

You May Also Like

Tool Intel – Understanding Air Tool Fittings and Couplers

Why don’t air tools come with fittings installed? Here’s why customers need to buy what they actually need.

Your customers may be using air tools in a variety of circumstances for an even wider variety of jobs. Here's how to help them understand why they need to buy the right fitting for the application.

View Full Diagram Here

There are multiple different sizes and styles, and what one shop uses may not be the same as another. The size and style affect the volume of air they can deliver, a critical point because air tools require a specific pressure and volume for proper operation, and restrictive fittings can limit their performance. Here’s a look at the most common sizes and styles found in most automotive shops, and how you can identify them.

Read the April Digital Edition of Counterman

The April issue contains article designed for technical training, management efficiency and store profitability.

ASE Education Foundation Seeking Outstanding Instructor

Nominations are being accepted for the 2024 Byrl Shoemaker/ASE Education Foundation Instructor of the Year award.

Why Does Engine Coolant Need Replacement?

Two specifications can be used to justify replacement — the condition of the additive package & the freezing point.

Gaskets vs. Seals

Whether your customer asks for a gasket or a seal, you know one thing: They’re trying to stop a leak.

Gaskets and Seals

Other Posts

MEMA Aftermarket Suppliers’ BMC to Host Summer Meeting

The Brake Manufacturers Council meeting will be held on May 31, in Naples, Florida.

Customer Service: How It’s Done

Customer service should be your number one priority, and it all starts with the greeting.

Tool Intel: Why Are There So Many Screwdrivers?

Screwdrivers come in many shapes and sizes, and they are not created equal.

Check the Part: Return Guide for CV-Joint Kit

Dorman offers these three tips to help to determine if it’s a valid warranty claim.

CV Joint Kit